Live demonstration of an EyePrint Prosthetic

Background of the Patient's Vision Problems

Background of the Patient's Vision Problems

This section reviews the patient's surgical history and explains why her vision changed over time.

This patient had radial keratotomy, also called RK surgery, in the early 1990s. During RK surgery, the surgeon makes small cuts on the cornea in a spoke pattern so the center of the cornea flattens, reducing the need for glasses or contact lenses.

Most RK patients saw well for many years, but as time has progressed, there have been many issues.

  • Blurry vision
  • Distorted vision
  • Ghosted vision
  • Shadow-y vision
  • Double vision
  • Other visual complications

This patient developed a large amount of scar tissue in the center of the cornea, which led to the need for a corneal transplant.

Introduction to the EyePrint Prosthetic


Because of the very irregular cornea, we decided to fit her with an EyePrint Prosthetic.

The EyePrint Prosthetic is a custom scleral lens designed to match the unique shape of the eye and improve vision in complex cases.

The EyePrint procedure is painless and takes less than three minutes.

What are the main benefits of Scleral Lens compared to other forms of vision correction?

Best Contact Lenses For Keratoconus

The Benefits of Scleral Lenses: Expert Advice from Costa Mesa’s Eye Doctor

From 20/40 to 20/20 Perfecting Scleral Lens Fitting for Clear Vision

Struggling with Blurry Vision or Glare at Night? This Lens Could Change Everything

EyePrint Procedure Steps

Below are the exact steps followed during the live demonstration.

First, the tip is placed at the edge of the impression material and locked into place.

  • The trigger is squeezed, which allows two separate materials to combine in the chamber of the tip.
  • The mixed materials are placed into a small plastic tray.
  • We wait for 40 seconds for the material to set.

With the material ready, we move to the patient.

  • The patient looks at a fixation target.
  • Quickly, the impression is inserted under the upper eyelid and then the lower eyelid while keeping the lids out of the way.
  • We let go and the patient continues looking at the target for about 90 seconds so the material can set.
  • The impression is removed.

After the impression is removed, we proceed with a diagnostic scleral lens fitting to determine the power that will be built into the EyePrint.

Schedule A Call Today!

From Impression to Custom Lens

From Impression to Custom Lens

Once the impressions are completed, the process moves to the laboratory stage.

The EyePrint lab in Colorado uses a 3-D scanner and captures more than three million data points from the impression to design a perfectly custom scleral lens.

The lens is fabricated in the lab and then shipped to our office for dispensing.

When the EyePrint arrives, we contact the patient and schedule the scleral lens dispense visit.

Patient Outcome


The results of this case demonstrate the potential of the EyePrint Prosthetic.

We were able to achieve 20/20 vision with the EyePrint for this patient.

We look forward to seeing how her next visits go and to confirming the sustained success of the device.

Your Vision, Our Commitment

If you face complex vision challenges, know that our team is ready to explore advanced solutions like the EyePrint Prosthetic. Together we can create a clear, comfortable future for your eyesight.

Patient Feedback


Insight Vision Optometry, Las Vegas
Privacy Overview